Scanner and Laser in one effect • 5mW diode laser • 15 colors plus white • Split colors • 13 gobos plus spot • Separate color and gobo wheels • High Speed Shutter with variable Speed • 170 degree pan / 110 degree tilt • Full Micro-stepping, with 4 stepper motors. • Built in Microphone • Auto switch to Stand-Alone (Master/Slave) operation when DMX signal is disconnected • Run up to 16 heads without controller. • DMX-512 protocol • Full Focusing. • Fan cooled • Uses 4 DMX Channels. • Optional RF-Wireless remote control • Digital DMX display
_ Bulb: EFR5 15V 150W (500Hrs) _ With 3 stepper motors controlled via internal microprocessor. _ With Gobo/Color Wheel. 17 gobos plus shutter and 9 one-color, 4 two-color , 1 threecolor and 1 four-color plus clear. _ High quality dichroic mirror. _ Strobe frequency from 1 to 7 fps. _ With blackout function and lamp saving switch-off function. When the unit receives blackout signal from a easy controller or an universal DMX controller, it will blackout immediately and finally switch off the lamp in 10 seconds, extending the lamp’s lifetime. _ Adjustable focus. _ Easy access door to bulb. _ Standard DMX-512 control and address. By DMX linking and XLR cable. _ This units can be linked together in a master/slave combination and run by built- in programs. _ Movement and speed controlled by automatic sound sensing. _ DMX signal pass-through device (relay) in case of unit failure. _ Compatible with easy controller or universal DMX controller. _ DMX signal / sound activation indication LED. _ Efficient axial fan cooling.
Light Source Bulb......................................................................469 (280 red, 63 green, 126 blue) LED’s 100,000hrs Beam angle.......................................................................................................................................61° POWER...............................................Auto-switching power Fuse...........................................................................................................................................2A Inrush Power................................................................................................................................23.2W THERMAL Maximum ambient temperature............................................................................................95° F (35°C) CONTROL & PROGRAMMING Data input................................................................................................locking 3-pin XLR male socket Data output...........................................................................................locking 3-pin XLR female socket Data pin configuration..............................................................................pin 1 shield, pin 2 (-), pin 3 (+) Protocols.......................................................................................................................DMX-512 USITT DMX Channels......................................................................................................................................6
All Scenes,Chases, and Options retained by battery back up 3 space 19” rackmount case Reversible DMX polarity out put MIDI input to control Chase and scene s 192 DMX Channels output 12 Scanners buttons (up to 16 Channels each) 6 Chases of 240 steps 240 Scenes in 30 Banks Audio Chase Speed and Fade time adjustments
Lamp: ZB ELC 24V 250W • 15 colors plus white • 2 Split colors • Projection angle 16 degrees • Electronic Dimming 0-100% • Built in Microphone • Run up to 16 heads without controller • DMX-512 protocol • Full Focusing • Fan cooled • Uses two DMX Channels • Removable Frost Filter • Easy Lamp Replacement